Supported Equipment

Ethernet

RadMoon2

Description

The RAD-Moon contains two different Ethernet physical layer implementations (PHYs) that are internally connected: BroadR-Reach® and conventional 10/100 twisted pair Ethernet. Whenever any data is received over either connection, it is automatically sent out on the other, creating a seamless link between the two attached devices. Full-duplex operation is supported, so data can be sent in both directions simultaneously.

Product

Adapter Adapter

  • Powered by an industry-standard mini-USB connection
  • A 100BASE-T1 PHY (NXP) connected directly to a 4-wire 100BASE-TX Ethernet PHY
  • Automatic master/slave configuration for the attached Automotive Ethernet device
  • Molex Mini50 for Automotive Ethernet connection
  • Standard RJ-45 for 10/100 Ethernet connection with automatic configuration for 100 Mb/s Ethernet networks
  • Link and activity LEDs for both connections
  • Full-duplex support for simultaneous data transmission and reception across both PHYs
  • Rugged aluminum enclosure with rubber bumpers for durability
  • Ethernet cable and USB cable included

Can Dongle

Innomaker

Description

Simple lightweight CAN communication tools when other tools are not necessary

Product

Dongle Dongle

  • CAN DB9 header to USB adapter
  • Works with open-source CAN tools
  • Comes with adapter for connecting raw twisted pair CAN wires

Peak-Can

Description

The PCAN-USB adapter enables simple connection to CAN networks. Its compact plastic casing makes it suitable for mobile applications.

Product

Dongle Dongle

  • Adapter for the USB connection (Full-Speed mode, compatible with USB 1.1, USB 2.0, and USB 3.0)
  • High-speed CAN connection (ISO 11898-2)
  • Bit rates from 5 kbit/s up to 1 Mbit/s
  • Time stamp resolution approx. 42 µs
  • Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
  • CAN bus connection via D-Sub, 9-pin (in accordance with CiA® 106)
  • NXP SJA1000 CAN controller, 16 MHz clock frequency
  • NXP PCA82C251 CAN transceiver
  • Galvanic isolation on the CAN connection up to 500 V (only for IPEH-002022)
  • CAN termination can be activated through a solder jumper
  • 5-Volt supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter
  • Voltage supply via USB
  • Extended operating temperature range from -40 to +85 °C (-40 to +185 °F)

Peak-Can FD

Description

The CAN FD adapter PCAN-USB FD allows the connection of CAN FD and CAN networks to a computer via USB. A galvanic isolation of up to 500 Volts decouples the PC from the CAN bus. The simple handling and its compact plastic casing make the adapter suitable for mobile applications.

Product

Dongle Dongle

  • Adapter for High-speed USB 2.0 (compatible to USB 1.1 and USB 3.0)
  • High-speed CAN connection (ISO 11898-2)
  • Complies with CAN specifications 2.0 A/B and FD
  • CAN FD support for ISO and Non-ISO standards switchable
  • CAN FD bit rates for the data field (64 bytes max.) from 25 kbit/s up to 12 Mbit/s
  • CAN bit rates from 25 kbit/s up to 1 Mbit/s
  • Time stamp resolution 1 μs
  • CAN bus connection via D-Sub, 9-pin (in accordance with CiA® 106)
  • FPGA implementation of the CAN FD controller
  • NXP TJA1044GT CAN transceiver
  • Galvanic isolation up to 500 V
  • CAN termination can be activated through a solder jumper
  • Measurement of bus load including error frames and overload frames on the physical bus
  • Induced error generation for incoming and outgoing CAN messages
  • 5-Volt supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter
  • Voltage supply via USB
  • Extended operating temperature range from -40 to +85 °C (-40 to +185 °F)

Bluetooth

ESP-WROVER-KIT

Description

ESP-WROVER-KIT is a highly integrated ultra-low-power development board which includes Flash and PSRAM. It achieves great performance with a 4.5 MB RAM and a dual-core 240 MHz CPU.

Product

Board Board

  • Wi-Fi (2.4 GHz band)
  • Bluetooth
  • Dual high performance Xtensa® 32-bit LX6 CPU cores
  • Ultra Low Power co-processor
  • Multiple peripherals

USB

GreatFet One

Description

GreatFET One is a hardware hacker’s best friend. With an extensible, open source design, two USB ports, and 100 expansion pins, GreatFET One is your essential gadget for hacking, making, and reverse engineering. By adding expansion boards called neighbors, you can turn GreatFET One into a USB peripheral that does almost anything.

Product

Board Board

  • programmable digital I/O
  • serial protocols including SPI, I2C, UART, and JTAG
  • logic analysis
  • analog I/O (ADC/DAC)
  • data acquisition
  • debugging
  • versatile USB functions including Facedancer
  • high-throughput hardware-assisted streaming serial engine
  • four fabulous LEDs! TODO

WiFi

ALFA AWUS036AXML

Description

The ALFA AWUS036AXML is a high-performance WiFi adapter, tailored for comprehensive WiFi testing, including but not limited to regular connectivity assessments. It boasts support for advanced functionalities such as monitor mode and packet injection, making it a versatile tool for network professionals. Its reliable performance and support for sophisticated network tasks make it an essential asset for quality network diagnostics and security testing.

Product

Adapter Adapter

  • Fast AXE3000 WiFi speed, up to 3Gbps, 2.5x faster than WiFi 5, backwards compatible with 802.11 a/b/g/n/ac WiFi.
  • Includes 2x detachable 5 dbi gain antennas- powerful reception included or upgrade to compatible directional or higher gain antennas. No limits!
  • USB 3.0 cable includes USB-C and USB-A connectors, suitable for all modern laptop and desktop computers.